Buick Regal 2.0L
LQSQP
76$
Availability: | |
---|---|
Quantity: | |
Product introduction
High Performance Catalytic Converter Fit Buick Regal 2.0L,This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
1. Recovery of exhaust gas purification capacity (core effect)
Reduce harmful emissions:
Through the internal platinum (Pt), palladium (Pd), rhodium (Rh) and other precious metals coating, the new three-way catalyst efficiently catalyzes the conversion of three pollutants in the exhaust gas:
Carbon monoxide (CO) → Carbon dioxide (CO₂)
Hydrocarbon (HC) → Water (H₂O) + CO₂
Nitrogen oxides (NOx) → Nitrogen (N₂) + Oxygen (O₂)
Make the exhaust gas meet the requirements of national six, European standards and other environmental regulations to reduce air pollution.
2. Improve engine performance
Smoother exhaust:
There is no carbon accumulation or blockage inside the new catalytic converter, reducing exhaust back pressure and reducing engine exhaust resistance, thus:
Improved power response (especially low RPM torque)
Optimize fuel economy (reduce fuel consumption)
3. Optimize engine performance
When the three-way catalytic converter is blocked or damaged, it will lead to poor exhaust, affecting the engine power and fuel consumption. The replacement of a new catalytic converter can restore exhaust smoothness and indirectly improve power response and fuel economy
4. Protect the oxygen sensor
The catalyst works in tandem with the oxygen sensor, and if the catalyst fails, inadequately treated exhaust gas may damage the oxygen sensor, causing the engine fault light to light up. Replacement of catalytic converter can avoid joint failure.
5. The normal installation and use of a compliant three-way catalytic converter will not harm the vehicle, but is the guarantee of environmental protection and stable engine operation.
The hazards are mainly due to poor quality products, incorrect installation or improper maintenance. If the vehicle has power drop, fault light on or exhaust odor, it is necessary to check the status of the catalytic converter in time.
6. Summary: The three-way catalytic converter is the core component of vehicle environmental protection, ensuring its normal operation can not only reduce environmental pollution, but also ensure vehicle performance and compliance. If your Buick has exhaust odor, power drop or fault light prompt, it is recommended to check the catalytic converter status in time.
Catalytic converter parameter | |
Type | Catalytic Converter |
Model | Buick Regal 2.0L |
Standard | Euro IV |
SIZE | 25cmX8cmX8cm |
MATERIAL | 409L stainless steel |
Substrate | Honeycomb ceramic core |
Application | Automotive Exhaust System |
MOQ | 1 Set |
PAYMENT | T/T |
Packaging & Delivery | 1:Customer requirement |
2:Individually bubble wrapped, cartons,pallets, wooden box | |
PLACE OF ORIGIN | China (Mainland)Shandong |
Port | Qingdao or Tianjin, China |
Warranty | 50,000 kilometers a year |
Product introduction
High Performance Catalytic Converter Fit Buick Regal 2.0L,This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
1. Recovery of exhaust gas purification capacity (core effect)
Reduce harmful emissions:
Through the internal platinum (Pt), palladium (Pd), rhodium (Rh) and other precious metals coating, the new three-way catalyst efficiently catalyzes the conversion of three pollutants in the exhaust gas:
Carbon monoxide (CO) → Carbon dioxide (CO₂)
Hydrocarbon (HC) → Water (H₂O) + CO₂
Nitrogen oxides (NOx) → Nitrogen (N₂) + Oxygen (O₂)
Make the exhaust gas meet the requirements of national six, European standards and other environmental regulations to reduce air pollution.
2. Improve engine performance
Smoother exhaust:
There is no carbon accumulation or blockage inside the new catalytic converter, reducing exhaust back pressure and reducing engine exhaust resistance, thus:
Improved power response (especially low RPM torque)
Optimize fuel economy (reduce fuel consumption)
3. Optimize engine performance
When the three-way catalytic converter is blocked or damaged, it will lead to poor exhaust, affecting the engine power and fuel consumption. The replacement of a new catalytic converter can restore exhaust smoothness and indirectly improve power response and fuel economy
4. Protect the oxygen sensor
The catalyst works in tandem with the oxygen sensor, and if the catalyst fails, inadequately treated exhaust gas may damage the oxygen sensor, causing the engine fault light to light up. Replacement of catalytic converter can avoid joint failure.
5. The normal installation and use of a compliant three-way catalytic converter will not harm the vehicle, but is the guarantee of environmental protection and stable engine operation.
The hazards are mainly due to poor quality products, incorrect installation or improper maintenance. If the vehicle has power drop, fault light on or exhaust odor, it is necessary to check the status of the catalytic converter in time.
6. Summary: The three-way catalytic converter is the core component of vehicle environmental protection, ensuring its normal operation can not only reduce environmental pollution, but also ensure vehicle performance and compliance. If your Buick has exhaust odor, power drop or fault light prompt, it is recommended to check the catalytic converter status in time.
Catalytic converter parameter | |
Type | Catalytic Converter |
Model | Buick Regal 2.0L |
Standard | Euro IV |
SIZE | 25cmX8cmX8cm |
MATERIAL | 409L stainless steel |
Substrate | Honeycomb ceramic core |
Application | Automotive Exhaust System |
MOQ | 1 Set |
PAYMENT | T/T |
Packaging & Delivery | 1:Customer requirement |
2:Individually bubble wrapped, cartons,pallets, wooden box | |
PLACE OF ORIGIN | China (Mainland)Shandong |
Port | Qingdao or Tianjin, China |
Warranty | 50,000 kilometers a year |
Q1: Where is your factory?
A: We are located in Dezhou City, Shandong Province, China (Mainland).
Q2: How about the products packaging?
A: Generally we wrap our goods in poly-film , carton box and pallet and we can also pack the products as customers request.
Q3: What is your terms of payment?
A: T/T 30% as deposit, and T/T 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q4: How about the delivery time?
A: Generally, it will take 30 to 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5: Can you produce according to the samples?
A: Yes, if you buy in large quantity we can produce by your samples or technical drawings. We can build molds and fixtures.
Q6: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers need to pay the samplecost and the courier fee.
Q7: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers’ benefit. We respect every customer as our friend and we sincerely do business and make friend with them no matter where they are from.
Q9: Do you have any guarantee?
A: Yes, one year for our product quality assurance, and product life span is 50 thousand kilometers' driving.
Q10: What is the minimum order quantity?
A: 1 Set
Q11: Payment method?
A: T/T
Q12: About the freight?
A: We provide the buyer with the lowest factory price, all the freight generated by the buyer bear!
Q13: How to install?
A: It is recommended to go to the local repair shop to install, because they have complete tools, replace the old exhaust pipe, tighten the screw, the original location installation, very convenient!
Q1: Where is your factory?
A: We are located in Dezhou City, Shandong Province, China (Mainland).
Q2: How about the products packaging?
A: Generally we wrap our goods in poly-film , carton box and pallet and we can also pack the products as customers request.
Q3: What is your terms of payment?
A: T/T 30% as deposit, and T/T 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q4: How about the delivery time?
A: Generally, it will take 30 to 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5: Can you produce according to the samples?
A: Yes, if you buy in large quantity we can produce by your samples or technical drawings. We can build molds and fixtures.
Q6: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers need to pay the samplecost and the courier fee.
Q7: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers’ benefit. We respect every customer as our friend and we sincerely do business and make friend with them no matter where they are from.
Q9: Do you have any guarantee?
A: Yes, one year for our product quality assurance, and product life span is 50 thousand kilometers' driving.
Q10: What is the minimum order quantity?
A: 1 Set
Q11: Payment method?
A: T/T
Q12: About the freight?
A: We provide the buyer with the lowest factory price, all the freight generated by the buyer bear!
Q13: How to install?
A: It is recommended to go to the local repair shop to install, because they have complete tools, replace the old exhaust pipe, tighten the screw, the original location installation, very convenient!