- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
Great Wall Haval H6 1.5T front middle
LQSQP
68$
| Quantity: | |
|---|---|
Product introduction
Factory supply catalytic converters for Great Wall Haval H6 1.5T front middle，This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
Positive impact
The exhaust gas purification effect is improved
The new three-way catalytic converter can more efficiently convert harmful gases such as CO, HC and NOx in the tail gas into harmless substances, so that the emissions meet environmental protection standards and avoid the problem of annual inspection. If the original catalytic converter has failed, the normal exhaust gas purification function can be restored after replacement to reduce environmental pollution.
Potential improvements in power and fuel consumption
If the original catalytic converter is blocked or aging resulting in poor exhaust, the replacement may restore engine power and reduce fuel consumption. However, it is necessary to ensure that the new catalytic converter matches the original vehicle exhaust system, otherwise it may backfire.
Potential risks and negative effects
Suitability problem
Non-original parts risk: If the use of sub-plant three-way catalytic converter with substandard quality, it may increase exhaust resistance due to size and internal structure mismatch, which may lead to power decline, fuel consumption increase, and even trigger oxygen sensor failure (such as air fuel ratio imbalance).
Run-in period problem: the new catalytic converter needs to be run in with the engine, and there may be carbon accumulation or fuel consumption fluctuations caused by ignition difficulties and incomplete combustion in the short term.
Sensor and system interference
If the oxygen sensor is connected before and after the catalytic converter, improper installation or catalytic failure may affect the accuracy of the sensor data, cause the engine control unit (ECU) to misjudge, light the fault light, and affect the power output.
Hidden dangers of illegal or inferior parts
If you use a temporarily replaced inferior catalytic converter (such as products provided by illegal detection points), it may pass the annual inspection in the short term, but long-term use will aggravate exhaust pollution, and even cause more serious mechanical problems due to damage to the exhaust system.
Suggestions and precautions
Choose formal products and channels
Preference is given to original or certified secondary parts to ensure that the catalytic converter is fully compatible with the exhaust system of Haval H6.
Avoid using low-quality cleaning agents or temporary replacement schemes, which may damage the internal structure of the catalytic converter.
Professional installation and subsequent maintenance
Installation is performed by a professional technician to ensure tightness and compatibility with oxygen sensors.
Check the status of the three-way catalytic converter regularly, and it is recommended to clean it every 30,000 kilometers to prevent blockage.
Focus on run-in performance
If there is a short-term increase in fuel consumption or power fluctuations after replacement, it may be a normal phenomenon in the running-in period. If the problem persists, it is necessary to check the catalytic converter and exhaust system in time.
Product introduction
Factory supply catalytic converters for Great Wall Haval H6 1.5T front middle，This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
Positive impact
The exhaust gas purification effect is improved
The new three-way catalytic converter can more efficiently convert harmful gases such as CO, HC and NOx in the tail gas into harmless substances, so that the emissions meet environmental protection standards and avoid the problem of annual inspection. If the original catalytic converter has failed, the normal exhaust gas purification function can be restored after replacement to reduce environmental pollution.
Potential improvements in power and fuel consumption
If the original catalytic converter is blocked or aging resulting in poor exhaust, the replacement may restore engine power and reduce fuel consumption. However, it is necessary to ensure that the new catalytic converter matches the original vehicle exhaust system, otherwise it may backfire.
Potential risks and negative effects
Suitability problem
Non-original parts risk: If the use of sub-plant three-way catalytic converter with substandard quality, it may increase exhaust resistance due to size and internal structure mismatch, which may lead to power decline, fuel consumption increase, and even trigger oxygen sensor failure (such as air fuel ratio imbalance).
Run-in period problem: the new catalytic converter needs to be run in with the engine, and there may be carbon accumulation or fuel consumption fluctuations caused by ignition difficulties and incomplete combustion in the short term.
Sensor and system interference
If the oxygen sensor is connected before and after the catalytic converter, improper installation or catalytic failure may affect the accuracy of the sensor data, cause the engine control unit (ECU) to misjudge, light the fault light, and affect the power output.
Hidden dangers of illegal or inferior parts
If you use a temporarily replaced inferior catalytic converter (such as products provided by illegal detection points), it may pass the annual inspection in the short term, but long-term use will aggravate exhaust pollution, and even cause more serious mechanical problems due to damage to the exhaust system.
Suggestions and precautions
Choose formal products and channels
Preference is given to original or certified secondary parts to ensure that the catalytic converter is fully compatible with the exhaust system of Haval H6.
Avoid using low-quality cleaning agents or temporary replacement schemes, which may damage the internal structure of the catalytic converter.
Professional installation and subsequent maintenance
Installation is performed by a professional technician to ensure tightness and compatibility with oxygen sensors.
Check the status of the three-way catalytic converter regularly, and it is recommended to clean it every 30,000 kilometers to prevent blockage.
Focus on run-in performance
If there is a short-term increase in fuel consumption or power fluctuations after replacement, it may be a normal phenomenon in the running-in period. If the problem persists, it is necessary to check the catalytic converter and exhaust system in time.
