Honda Civic 1.7
LQSQP
100$
Availability: | |
---|---|
Quantity: | |
Product introduction
High quality catalytic converter for Honda Civic 1.7,This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
1. The exhaust gas purification effect is improved
Replacing the new three-way catalytic converter can significantly improve the exhaust gas purification efficiency and effectively reduce the emissions of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx). This helps the vehicle to pass environmental protection testing and avoid failing to pass the annual audit due to excessive exhaust emissions.
2. Engine performance optimization
Power boost: The new three-way catalytic converter optimizes exhaust back pressure, allowing the engine to exhaust more smoothly, thereby increasing power output. Some owners reported that the power response of the replacement vehicle was more rapid, and the acceleration performance was improved.
Reduced fuel consumption: After the replacement of the three-way catalytic converter, the combustion efficiency of the engine will be improved by better exhaust performance, thereby reducing fuel consumption.
3. The fault light is eliminated
If the engine fault light is on due to blockage or failure of the original three-way catalyst, after replacing the new three-way catalyst, the fault light will be extinguished and the vehicle will resume normal operation.
4. Improved driving experience
Noise reduction: The new three-way catalytic converter can reduce the noise of exhaust emissions and improve the comfort of driving.
Low-speed performance optimization: After replacement, the power performance of the vehicle at low speed will be more stable, and there will no longer be problems such as acceleration weakness caused by the blockage of the three-way catalytic converter.
5. Less exhaust pollution
Conversion of harmful gases: The three-way catalytic converter can convert harmful gases such as carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) in automobile exhaust into harmless carbon dioxide (CO₂), water (H₂O) and nitrogen (N₂) through oxidation and reduction reactions, thus greatly reducing the pollutant content in exhaust emissions, so that automobile exhaust can be purified. Reduce pollution to the atmosphere.
6. Meet emission standards: With the increasingly stringent environmental requirements, automobile exhaust emission standards continue to improve. The use of three-way catalytic converters enables cars to meet higher emission standards, such as Euro IV, Euro V, etc., which helps to reduce the contribution of cars to urban air pollution, improve air quality, and protect the ecological environment.
Product introduction
High quality catalytic converter for Honda Civic 1.7,This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
1. The exhaust gas purification effect is improved
Replacing the new three-way catalytic converter can significantly improve the exhaust gas purification efficiency and effectively reduce the emissions of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx). This helps the vehicle to pass environmental protection testing and avoid failing to pass the annual audit due to excessive exhaust emissions.
2. Engine performance optimization
Power boost: The new three-way catalytic converter optimizes exhaust back pressure, allowing the engine to exhaust more smoothly, thereby increasing power output. Some owners reported that the power response of the replacement vehicle was more rapid, and the acceleration performance was improved.
Reduced fuel consumption: After the replacement of the three-way catalytic converter, the combustion efficiency of the engine will be improved by better exhaust performance, thereby reducing fuel consumption.
3. The fault light is eliminated
If the engine fault light is on due to blockage or failure of the original three-way catalyst, after replacing the new three-way catalyst, the fault light will be extinguished and the vehicle will resume normal operation.
4. Improved driving experience
Noise reduction: The new three-way catalytic converter can reduce the noise of exhaust emissions and improve the comfort of driving.
Low-speed performance optimization: After replacement, the power performance of the vehicle at low speed will be more stable, and there will no longer be problems such as acceleration weakness caused by the blockage of the three-way catalytic converter.
5. Less exhaust pollution
Conversion of harmful gases: The three-way catalytic converter can convert harmful gases such as carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) in automobile exhaust into harmless carbon dioxide (CO₂), water (H₂O) and nitrogen (N₂) through oxidation and reduction reactions, thus greatly reducing the pollutant content in exhaust emissions, so that automobile exhaust can be purified. Reduce pollution to the atmosphere.
6. Meet emission standards: With the increasingly stringent environmental requirements, automobile exhaust emission standards continue to improve. The use of three-way catalytic converters enables cars to meet higher emission standards, such as Euro IV, Euro V, etc., which helps to reduce the contribution of cars to urban air pollution, improve air quality, and protect the ecological environment.
Q1: Where is your factory?
A: We are located in Dezhou City, Shandong Province, China (Mainland).
Q2: How about the products packaging?
A: Generally we wrap our goods in poly-film , carton box and pallet and we can also pack the products as customers request.
Q3: What is your terms of payment?
A: T/T 30% as deposit, and T/T 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q4: How about the delivery time?
A: Generally, it will take 30 to 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5: Can you produce according to the samples?
A: Yes, if you buy in large quantity we can produce by your samples or technical drawings. We can build molds and fixtures.
Q6: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers need to pay the samplecost and the courier fee.
Q7: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers’ benefit. We respect every customer as our friend and we sincerely do business and make friend with them no matter where they are from.
Q9: Do you have any guarantee?
A: Yes, one year for our product quality assurance, and product life span is 50 thousand kilometers' driving.
Q10: What is the minimum order quantity?
A: 1 Set
Q11: Payment method?
A: T/T
Q12: About the freight?
A: We provide the buyer with the lowest factory price, all the freight generated by the buyer bear!
Q13: How to install?
A: It is recommended to go to the local repair shop to install, because they have complete tools, replace the old exhaust pipe, tighten the screw, the original location installation, very convenient!
Q1: Where is your factory?
A: We are located in Dezhou City, Shandong Province, China (Mainland).
Q2: How about the products packaging?
A: Generally we wrap our goods in poly-film , carton box and pallet and we can also pack the products as customers request.
Q3: What is your terms of payment?
A: T/T 30% as deposit, and T/T 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q4: How about the delivery time?
A: Generally, it will take 30 to 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5: Can you produce according to the samples?
A: Yes, if you buy in large quantity we can produce by your samples or technical drawings. We can build molds and fixtures.
Q6: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers need to pay the samplecost and the courier fee.
Q7: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers’ benefit. We respect every customer as our friend and we sincerely do business and make friend with them no matter where they are from.
Q9: Do you have any guarantee?
A: Yes, one year for our product quality assurance, and product life span is 50 thousand kilometers' driving.
Q10: What is the minimum order quantity?
A: 1 Set
Q11: Payment method?
A: T/T
Q12: About the freight?
A: We provide the buyer with the lowest factory price, all the freight generated by the buyer bear!
Q13: How to install?
A: It is recommended to go to the local repair shop to install, because they have complete tools, replace the old exhaust pipe, tighten the screw, the original location installation, very convenient!