- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
Toyota RAV4
LQSQP
85$
| Quantity: | |
|---|---|
Product introduction
Premium catalytic converter for Toyota RAV4，This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
1. Meet environmental regulations and emission standards
Statutory requirement
Since 2000, domestic regulations require that all fuel vehicles must be equipped with a three-way catalytic converter. As a global model, Toyota RAV4 has integrated this device when leaving the factory to meet stringent emission standards such as National 6B and ensure vehicle annual inspection compliance. If the catalytic converter fails, the carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) in the exhaust gas will exceed the standard, directly leading to the failure of the annual inspection, and the vehicle cannot legally be on the road.
Global market adaptability
RAV4, as a global cumulative sales of more than 12 million models, needs to adapt to environmental regulations in different regions. The three-way catalytic converter converts harmful gases into carbon dioxide (CO₂), water (H₂O) and nitrogen (N₂) through REDOX reactions to reduce environmental pollution.
2, optimize engine performance and fuel economy
Precise air-fuel ratio control
The front oxygen sensor works in conjunction with the three-way catalytic converter to monitor the exhaust oxygen content in real time and feed back to the ECU to dynamically adjust the fuel injection to ensure that the air-fuel ratio is close to the ideal value (14.7:1). This not only improves combustion efficiency, but also avoids power lag or increased fuel consumption caused by too thick or too thin mixture.
Reduced exhaust resistance
RAV4's ternary catalytic converter uses honeycomb ceramic carrier structure to balance exhaust back pressure and catalytic efficiency. If the catalytic converter is blocked or damaged, it will lead to abnormal exhaust resistance, obvious torque loss at low speed, and blocked power output at high speed.
Hybrid models fit
The 2.5L engine in the RAV4 hybrid works in tandem with a three-way catalytic converter to improve ride comfort while reducing fuel consumption. The highly efficient purification capacity of the catalytic converter ensures that the hybrid system still meets emission standards in energy-saving mode.
3, extend vehicle life and maintenance cost control
Protection core
By converting sulfide and acid gas, the three-way catalytic converter reduces the corrosion of the exhaust system (such as mufflers, oxygen sensors) and delays the aging of components. Unpurified HC entering the exhaust pipe will also exacerbate carbon accumulation and affect engine stability.
Reduce maintenance costs
The original catalytic converter contains platinum, palladium, rhodium and other precious metals, and the replacement cost is as high as thousands of yuan. Regular maintenance (such as cleaning every 30,000 km) can extend its life and avoid high replacement costs due to complete failure.
4, avoid legal and economic risks
Prevent fines and forced scrapping
Illegal disassembly or use of defunct catalysts will violate the Air Pollution Prevention Law and face fines and even the risk of forced vehicle scrapping. RAV4 owners need to make sure the catalytic converter is working properly to be legally on the road.
Guaranteed value rate
The status of the three-way catalytic converter is an important test item of used car trading. The retention of the original catalytic converter can increase the residual value of the vehicle, while failure or secondary parts may lead to depreciation.
5. Exclusive design advantages of Toyota RAV4
TNGA architecture adaptation: The current RAV4 is built on the TNGA-K platform, and the catalytic converter design is highly matched with the engine exhaust characteristics to ensure the balance between catalytic efficiency and power output.
High temperature resistance and anti-theft: double stainless steel shell and ceramic fiber insulation layer, suitable for high load conditions; Some models are equipped with anti-demolition brackets to reduce the risk of theft of precious metal carriers.
Hybrid system collaboration: The hybrid catalytic converter can still quickly reach the working temperature (above 300 ° C) under frequent start-stop conditions to ensure emission control during cold start.
Product introduction
Premium catalytic converter for Toyota RAV4，This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
1. Meet environmental regulations and emission standards
Statutory requirement
Since 2000, domestic regulations require that all fuel vehicles must be equipped with a three-way catalytic converter. As a global model, Toyota RAV4 has integrated this device when leaving the factory to meet stringent emission standards such as National 6B and ensure vehicle annual inspection compliance. If the catalytic converter fails, the carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) in the exhaust gas will exceed the standard, directly leading to the failure of the annual inspection, and the vehicle cannot legally be on the road.
Global market adaptability
RAV4, as a global cumulative sales of more than 12 million models, needs to adapt to environmental regulations in different regions. The three-way catalytic converter converts harmful gases into carbon dioxide (CO₂), water (H₂O) and nitrogen (N₂) through REDOX reactions to reduce environmental pollution.
2, optimize engine performance and fuel economy
Precise air-fuel ratio control
The front oxygen sensor works in conjunction with the three-way catalytic converter to monitor the exhaust oxygen content in real time and feed back to the ECU to dynamically adjust the fuel injection to ensure that the air-fuel ratio is close to the ideal value (14.7:1). This not only improves combustion efficiency, but also avoids power lag or increased fuel consumption caused by too thick or too thin mixture.
Reduced exhaust resistance
RAV4's ternary catalytic converter uses honeycomb ceramic carrier structure to balance exhaust back pressure and catalytic efficiency. If the catalytic converter is blocked or damaged, it will lead to abnormal exhaust resistance, obvious torque loss at low speed, and blocked power output at high speed.
Hybrid models fit
The 2.5L engine in the RAV4 hybrid works in tandem with a three-way catalytic converter to improve ride comfort while reducing fuel consumption. The highly efficient purification capacity of the catalytic converter ensures that the hybrid system still meets emission standards in energy-saving mode.
3, extend vehicle life and maintenance cost control
Protection core
By converting sulfide and acid gas, the three-way catalytic converter reduces the corrosion of the exhaust system (such as mufflers, oxygen sensors) and delays the aging of components. Unpurified HC entering the exhaust pipe will also exacerbate carbon accumulation and affect engine stability.
Reduce maintenance costs
The original catalytic converter contains platinum, palladium, rhodium and other precious metals, and the replacement cost is as high as thousands of yuan. Regular maintenance (such as cleaning every 30,000 km) can extend its life and avoid high replacement costs due to complete failure.
4, avoid legal and economic risks
Prevent fines and forced scrapping
Illegal disassembly or use of defunct catalysts will violate the Air Pollution Prevention Law and face fines and even the risk of forced vehicle scrapping. RAV4 owners need to make sure the catalytic converter is working properly to be legally on the road.
Guaranteed value rate
The status of the three-way catalytic converter is an important test item of used car trading. The retention of the original catalytic converter can increase the residual value of the vehicle, while failure or secondary parts may lead to depreciation.
5. Exclusive design advantages of Toyota RAV4
TNGA architecture adaptation: The current RAV4 is built on the TNGA-K platform, and the catalytic converter design is highly matched with the engine exhaust characteristics to ensure the balance between catalytic efficiency and power output.
High temperature resistance and anti-theft: double stainless steel shell and ceramic fiber insulation layer, suitable for high load conditions; Some models are equipped with anti-demolition brackets to reduce the risk of theft of precious metal carriers.
Hybrid system collaboration: The hybrid catalytic converter can still quickly reach the working temperature (above 300 ° C) under frequent start-stop conditions to ensure emission control during cold start.
