Dongfeng Jingyi 1.6L
LQSQP
69$
Availability: | |
---|---|
Quantity: | |
Product introduction
Premium catalytic converter for The Dongfeng Jingyi 1.6L,This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
1. Exhaust gas purification and environmental protection
The three-way catalytic converter converts carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) emitted by the engine into harmless carbon dioxide (CO₂), water (H₂O) and nitrogen (N₂) 134 through a REDOX reaction. This process significantly reduces exhaust pollution, helps vehicles meet environmental emission standards (such as State VI), and avoids annual inspection failures due to excessive exhaust emissions.
2. Improve engine performance and fuel economy
Power optimization: If the three-way catalytic converter is blocked or fails, it will lead to poor exhaust, resulting in power decline, acceleration and other problems. The installation of a working three-way catalytic converter can maintain the smooth exhaust system and ensure the engine power output 58.
Reduce fuel consumption: A clogged three-way catalytic converter will increase the engine load, resulting in increased fuel consumption. The new catalytic converter indirectly improves fuel efficiency by optimizing exhaust pressure 58.
3. Reduce failure and maintenance costs
Prevent engine fault lights from turning on: The catalyst and the front and rear oxygen sensors work together, if the catalyst fails, the oxygen sensor detects abnormal data may trigger the fault light alarm, affecting the normal operation of the vehicle.
Extend the life of the exhaust system: Clogged catalysts can lead to overheating of the exhaust system or component damage, and the new catalytic converter reduces these risks.
4. Avoid the risk of illegal modification
Some owners may try to remove or modify the catalytic converter because of its expensive price, but this will lead to excessive exhaust emissions, fail to pass the annual inspection, and even face legal penalties. Installing a compliant three-way catalytic converter38 is a legal and necessary option.
5. Suggestions for specific vehicle models
Although the search results do not directly mention the special design of the Jingyi 1.6L model, the general principles apply:
Material and process: Honeycomb ceramic carrier is usually used inside the catalytic converter, coated with platinum (Pt), rhodium (Rh), palladium (Pd) and other precious metal catalysts, and the model suitable for the model needs to be selected to ensure the best catalytic efficiency 347.
Installation position: Located at the front end of the exhaust pipe, pay attention to the chassis protection to avoid damage due to bumps during driving.
Product introduction
Premium catalytic converter for The Dongfeng Jingyi 1.6L,This product we use high-quality raw materials 409 stainless steel, and with high flow ceramic carrier, to help each car can purify exhaust gas, reduce fuel consumption, improve power, and extinguish engine failure lights!
1. Exhaust gas purification and environmental protection
The three-way catalytic converter converts carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) emitted by the engine into harmless carbon dioxide (CO₂), water (H₂O) and nitrogen (N₂) 134 through a REDOX reaction. This process significantly reduces exhaust pollution, helps vehicles meet environmental emission standards (such as State VI), and avoids annual inspection failures due to excessive exhaust emissions.
2. Improve engine performance and fuel economy
Power optimization: If the three-way catalytic converter is blocked or fails, it will lead to poor exhaust, resulting in power decline, acceleration and other problems. The installation of a working three-way catalytic converter can maintain the smooth exhaust system and ensure the engine power output 58.
Reduce fuel consumption: A clogged three-way catalytic converter will increase the engine load, resulting in increased fuel consumption. The new catalytic converter indirectly improves fuel efficiency by optimizing exhaust pressure 58.
3. Reduce failure and maintenance costs
Prevent engine fault lights from turning on: The catalyst and the front and rear oxygen sensors work together, if the catalyst fails, the oxygen sensor detects abnormal data may trigger the fault light alarm, affecting the normal operation of the vehicle.
Extend the life of the exhaust system: Clogged catalysts can lead to overheating of the exhaust system or component damage, and the new catalytic converter reduces these risks.
4. Avoid the risk of illegal modification
Some owners may try to remove or modify the catalytic converter because of its expensive price, but this will lead to excessive exhaust emissions, fail to pass the annual inspection, and even face legal penalties. Installing a compliant three-way catalytic converter38 is a legal and necessary option.
5. Suggestions for specific vehicle models
Although the search results do not directly mention the special design of the Jingyi 1.6L model, the general principles apply:
Material and process: Honeycomb ceramic carrier is usually used inside the catalytic converter, coated with platinum (Pt), rhodium (Rh), palladium (Pd) and other precious metal catalysts, and the model suitable for the model needs to be selected to ensure the best catalytic efficiency 347.
Installation position: Located at the front end of the exhaust pipe, pay attention to the chassis protection to avoid damage due to bumps during driving.
Q1: Where is your factory?
A: We are located in Dezhou City, Shandong Province, China (Mainland).
Q2: How about the products packaging?
A: Generally we wrap our goods in poly-film , carton box and pallet and we can also pack the products as customers request.
Q3: What is your terms of payment?
A: T/T 30% as deposit, and T/T 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q4: How about the delivery time?
A: Generally, it will take 30 to 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5: Can you produce according to the samples?
A: Yes, if you buy in large quantity we can produce by your samples or technical drawings. We can build molds and fixtures.
Q6: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers need to pay the samplecost and the courier fee.
Q7: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers’ benefit. We respect every customer as our friend and we sincerely do business and make friend with them no matter where they are from.
Q9: Do you have any guarantee?
A: Yes, one year for our product quality assurance, and product life span is 50 thousand kilometers' driving.
Q10: What is the minimum order quantity?
A: 1 Set
Q11: Payment method?
A: T/T
Q12: About the freight?
A: We provide the buyer with the lowest factory price, all the freight generated by the buyer bear!
Q13: How to install?
A: It is recommended to go to the local repair shop to install, because they have complete tools, replace the old exhaust pipe, tighten the screw, the original location installation, very convenient!
Q1: Where is your factory?
A: We are located in Dezhou City, Shandong Province, China (Mainland).
Q2: How about the products packaging?
A: Generally we wrap our goods in poly-film , carton box and pallet and we can also pack the products as customers request.
Q3: What is your terms of payment?
A: T/T 30% as deposit, and T/T 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q4: How about the delivery time?
A: Generally, it will take 30 to 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5: Can you produce according to the samples?
A: Yes, if you buy in large quantity we can produce by your samples or technical drawings. We can build molds and fixtures.
Q6: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers need to pay the samplecost and the courier fee.
Q7: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers’ benefit. We respect every customer as our friend and we sincerely do business and make friend with them no matter where they are from.
Q9: Do you have any guarantee?
A: Yes, one year for our product quality assurance, and product life span is 50 thousand kilometers' driving.
Q10: What is the minimum order quantity?
A: 1 Set
Q11: Payment method?
A: T/T
Q12: About the freight?
A: We provide the buyer with the lowest factory price, all the freight generated by the buyer bear!
Q13: How to install?
A: It is recommended to go to the local repair shop to install, because they have complete tools, replace the old exhaust pipe, tighten the screw, the original location installation, very convenient!